Math. Comput. Appl., Volume 29, Issue 3 (June 2024) – 12 articles

Recently, nuclear abnormalities in avian erythrocytes have been used as biomarkers of genotoxicity in several species. Anomalous shapes are usually detected in the nuclei by means of microscopy inspection. However, due to inter- and intra-observer variability, the classification of these blood cell abnormalities could be problematic for replicating research. Deep learning, as a powerful image analysis technique, can be used in this context to improve standardization in identifying the biological configurations of medical and veterinary importance. In this study, we present a standardized deep learning model for identifying and classifying abnormal shapes in erythrocyte nuclei in blood smears of the hemispheric and synanthropic kelp gulls (Larus dominicanus). We trained three convolutional backbones (ResNet34, ResNet50, and ResNet101 architectures) to obtain models capable of detecting and classifying these abnormalities in blood cells. The analysis was performed at three discrimination levels of classification, with broad categories subdivided into increasingly specific subcategories (level 1: “normal”, “abnormal”, “other”; level 2: “normal”, “ENAs”, “micronucleus”, “other”; level 3: “normal”, “irregular”, “displaced”, “enucleated”, “micronucleus”, “other”). The results were more than adequate and very similar in levels 1 and 2 (F1-score 84.6% and 83.6%, and accuracy 83.9% and 82.6%). In level 3, performance was lower (F1-score 65.9% and accuracy 80.8%). It can be concluded that the level 2 analysis should be considered the most appropriate as it is more specific than level 1, with similar quality of performance. This method has proven to be a fast, efficient, and standardized approach that reduces the dependence on human supervision in the classification of nuclear abnormalities in avian erythrocytes, and can be adapted to be used in similar contexts with reduced effort. Full article

The randomization-based feedforward neural network has raised great interest in the scientific community due to its simplicity, training speed, and accuracy comparable to traditional learning algorithms. The basic algorithm consists of randomly determining the weights and biases of the hidden layer and analytically calculating the weights of the output layer by solving a linear overdetermined system using the Moore–Penrose generalized inverse. When processing large volumes of data, randomization-based feedforward neural network models consume large amounts of memory and drastically increase training time. To efficiently solve the above problems, parallel and distributed models have recently been proposed. Previous reviews of randomization-based feedforward neural network models have mainly focused on categorizing and describing the evolution of the algorithms presented in the literature. The main contribution of this paper is to approach the topic from the perspective of the handling of large volumes of data. In this sense, we present a current and extensive review of the parallel and distributed models of randomized feedforward neural networks, focusing on extreme learning machine. In particular, we review the mathematical foundations (Moore–Penrose generalized inverse and solution of linear systems using parallel and distributed methods) and hardware and software technologies considered in current implementations. Full article

A numerical method is used to solve the thermal analysis of natural convection in enclosures. This paper proposes the use of an implicit artificial-compressibility model in conjunction with the Radial Point Interpolation Meshless (RPIM) method to mimic laminar natural convective heat transport. The technique couples the pressure with the velocity components using an artificial compressibility model. The RPIM is used to discretize the spatial terms of the governing equation. We solve the semi-algebraic system implicitly in backward Euler pseudo-time. The proposed method solves two test problems—natural convection in the annulus of concentric circular cylinders and trapezoidal cavity. Additionally, the results are validated using experimental and numerical data available in the literature. Excellent agreement was seen between the numerical results acquired with the suggested method and those obtained through the standard techniques found in the literature. Full article

This work introduces a 2D model that calculates power losses in coaxial magnetic gears (CMGs). The eddy current losses of the magnets are computed analytically, whereas the core losses of the ferromagnetic segments are computed using an analytical–finite element hybrid model. The results were within 1.51% and 3.18% of those obtained from an FEA for the eddy current and core losses in the CMG for an indicative inner rotor speed of 2500 rpm. In addition, the significance of the circumferential magnet segmentation is demonstrated in the CMGs. Furthermore, a parametric investigation of the efficiency of the system for different applied external loads is carried out. Finally, a mesh sensitivity analysis is performed, along with the computation of the average power losses throughout one full period, resulting in an at least 80% reduction in computational costs with a negligible effect on accuracy. The developed model could be a valuable tool for the minimization of power losses in CMGs since it combines high accuracy with a low computational cost. Full article

This study explores trust dynamics within online social networks, blending social science theories with advanced machine-learning (ML) techniques. We examine trust’s multifaceted nature—definitions, types, and mechanisms for its establishment and maintenance—and analyze social network structures through graph theory. Employing a diverse array of ML models (e.g., KNN, SVM, Naive Bayes, Gradient Boosting, and Neural Networks), we predict connection strengths on Facebook, focusing on model performance metrics such as accuracy, precision, recall, and F1-score. Our methodology, executed in Python using the Anaconda distribution, unveils insights into trust formation and sustainability on social media, highlighting the potent application of ML in understanding these dynamics. Challenges, including the complexity of modeling social behaviors and ethical data use concerns, are discussed, emphasizing the need for continued innovation. Our findings contribute to the discourse on trust in social networks and suggest future research directions, including the application of our methodologies to other platforms and the study of online trust over time. This work not only advances the academic understanding of digital social interactions but also offers practical implications for developers, policymakers, and online communities. Full article

A simple-form scalar differential equation with delay and nonlinear negative periodic feedback is considered. The existence of several types of slowly oscillating periodic solutions is shown with the same and double periods of the feedback coefficient. The periodic solutions are built explicitly in the case with piecewise constant nonlinearities involved. The periodic dynamics are shown to persist under small perturbations of the equation, which make it smooth. The theoretical results are verified through extensive numerical simulations. Full article

In several industrial fields, environmental and operational data are acquired with numerous purposes, potentially generating a huge quantity of data containing valuable information for management actions. This work proposes a methodology for clustering time series based on the K-medoids algorithm using a convex combination of different time series correlation metrics, the COMB distance. The multidimensional scaling procedure is used to enhance the visualization of the clustering results, and a matrix plot display is proposed as an efficient visualization tool to interpret the COMB distance components. This is a general-purpose methodology that is intended to ease time series interpretation; however, due to the relevance of the field, this study explores the clustering of time series judiciously collected from data of a wind farm located on a complex terrain. Using the COMB distance for wind speed time bands, clustering exposes operational similarities and dissimilarities among neighboring turbines which are influenced by the turbines’ relative positions and terrain features and regarding the direction of oncoming wind. In a significant number of cases, clustering does not coincide with the natural geographic grouping of the turbines. A novel representation of the contributing distances—the COMB distance matrix plot—provides a quick way to compare pairs of time bands (turbines) regarding various features. Full article

In this work, we derived a new type model for spatial Hill’s system considering the created perturbation by the parameter effect of the continuation fractional potential. The new model is considered a reduced system from the restricted three-body problem under the same effect for describing Hill’s problem. We identified the associated Lagrangian and Hamiltonian functions of the new system, and used them to verify the existence of the new equations of motion. We also proved that the new model has different six valid solutions under different six symmetries transformations as well as the original solution, where the new model is an invariant under these transformations. The several symmetries of Hill’s model can extremely simplify the calculation and analysis of preparatory studies for the dynamical behavior of the system. Finally, we confirm that these symmetries also authorize us to explore the similarities and differences among many classes of paths that otherwise differ from the obtained trajectories by restricted three-body problem. Full article

The evaluation and accurate diagnosis of the type and severity of aortic stenosis relies on the precision of medical imaging technology and clinical correlations and the expertise of medical professionals. The application of the clinical correlation to different aortic stenosis morphologies and severities is investigated. The manner in which numerical techniques can be used to simulate the blood flow through pathological aortic valves was analysed and compared to the ground-truth CFD model. Larger pressure gradients are estimated in all severities of rheumatic aortic valves compared to calcific aortic valves. The zero-dimensional morphology-insensitive model underpredicted the transvalvular pressure gradient with the greatest error. The 1D model underestimated the pressure gradient in rheumatic cases and overestimated the pressure gradient in calcific cases. The pressure gradients estimated by the clinical approach depends on the location of the flow vena contracta and is sensitive to the severity and type of valve lesion. Through the analysis of entropy generation within the flow domain, the dominant parameters and regions driving adverse pressure gradients were identified. It is concluded that sudden expansion is the dominant parameter leading to higher pressure gradients in rheumatic heart valves compared to calcific ones. Full article

In this study, we show that automata theory is also a suitable tool for analyzing a more complex type of the k-forcing process. First, the definition of k-forcing automata is presented according to the definition of k-forcing for graphs. Moreover, we study and discuss the language of k-forcing automata for particular graphs. Also, for some graphs with different k-forcing sets, we study the languages of their k-forcing automata. In addition, for some given recognizable languages, we study the structure of graphs. After that, we show that k-forcing automata arising from isomorph graphs are also isomorph. Also, we present the style of words that can be recognized with k-forcing automata. Moreover, we introduce the structure of graphs the k-forcing automata arising from which recognize some particular languages. To clarify the notions and the results obtained in this study, some examples are submitted as well. Full article

In this study, a new generalized fractal–fractional (FF) derivative is proposed. By applying this definition to some elementary functions, we show its compatibility with the results of the FF derivative in the Caputo sense with the power law. The main elements of classical differential calculus are introduced in terms of this new derivative. Thus, we establish and demonstrate the basic operations with derivatives, chain rule, mean value theorems with their immediate applications and inverse function’s derivative. We complete the theory of generalized FF calculus by proposing a notion of integration and presenting two important results of integral calculus: the fundamental theorem and Barrow’s rule. Finally, we analytically solve interesting FF ordinary differential equations by applying our proposed definition. Full article

Using a meshless method, a simulation of steel billets in a pusher-type reheating furnace is carried out for the first time. The simulation represents an affordable way to replace the measurements. The heat transfer from the billets with convection and radiation is considered. Inside each of the billets, the heat diffusion equation is solved on a two-dimensional central slice of the billet. The diffusion equation is solved in a strong form by the Local Radial Basis Function Collocation Method (LRBFCM) with explicit time-stepping. The ray tracing procedure solves the radiation, where the view factors are computed with the Monte Carlo method. The changing number of billets in the furnace at the start and the end of the loading and unloading of the furnace is considered. A sensitivity study on billets’ temperature evolution is performed as a function of a different number of rays used in the Monte Carlo method, different stopping times of the billets in the furnace, and different spacing between the billets. The temperature field simulation is also essential for automatically optimizing the furnace’s productivity, energy consumption, and the billet’s quality. For the first time, the LRBFCM is successfully demonstrated for solving such a complex industrial problem. Full article