Fire, Volume 7, Issue 5 (May 2024) – 19 articles

We present a novel statistical methodology for analyzing shifts in spatio-temporal fire occurrence patterns within the Brazilian Pantanal, utilizing remote sensing data. Our approach employs a Log-Gaussian Cox Process to model the spatiotemporal dynamics of fire occurrence, deconstructing the intensity function into components of trend, seasonality, cycle, covariates, and time-varying spatial effects components. The results indicate a negative correlation between rainfall and fire intensity, with lower precipitation associated with heightened fire intensity. Forest formations exhibit a positive effect on fire intensity, whereas agricultural land use shows no significant impact. Savannas and grasslands, typical fire-dependent ecosystems, demonstrate a positive relationship with fire intensity. Human-induced fires, often used for agricultural purposes, contribute to an increase in both fire frequency and intensity, particularly in grassland areas. Trend analysis reveals fluctuating fire activity over time, with notable peaks in 2018–2021. Full article

Understanding exit choice behaviour is essential for optimising safety management strategies in building evacuations. Previous research focused on contextual attributes, such as spatial information, influencing exit choice, often using utility models based on monotonic functions of attributes. However, during emergencies, evacuees typically make rapid, less calculated decisions. The choice of context can significantly impact the evaluation of attributes, leading to preference reversals within the same choice set but under varying context conditions. This cognitive psychological phenomenon, known as context effects, encompasses the compromise effect, the similarity effect, and the attraction effect. While researchers have long recognised the pivotal role of context effects in human decision making, their incorporation into computer-aided evacuation management remains limited. To address this gap, we introduce context effects (CE) in a social force (SF) model, CE-SF. Evaluating CE-SF’s performance against the UF-SF model, which considers only the utility function (UF), we find that CE-SF better replicates exit choice behaviour across urgency levels, highlighting its potential to enhance evacuation strategies. Notably, our study identifies three distinct context effects during evacuations, emphasising their importance in advancing safety measures. Full article

Methane explosions often occur during the closure process of mine fire zones, during which the concentration of combustible gases such as monoxide and ethylene produced by coal combustion dynamically changes, which changes the risk of methane explosion. Therefore, studying the gas concentration distribution and methane explosion limits during the process of mine closure is of great significance for disaster prevention and control. In this paper, a three-dimensional physical model of gob was built, and the distribution of monoxide and ethylene in the process of fire zone closure was investigated. Further, the explosion limits of methane enriched with CO and C₂H₄ in the closed fire zone of gob were analyzed. The results indicate that CO and C₂H₄ would form a small-scale accumulation phenomenon near the fire zone after the closure of the fire zone, and when the fire zone is closed for more than 15 min, the mixed combustible gases in the environment lose their explosiveness. Full article

This study investigated the interplay between exit selection models and local pedestrian movement patterns within floor field frameworks. Specifically, this investigation analysed the performance of a multinomial logit exit choice model, incorporating both expected utility theory and cumulative prospect theory frameworks when coupled with three distinct local-level pedestrian movement models (FF-Von Neumann, FF-Moore, and NSFF). The expected utility theory framework considers the deterministic component as a linear relationship, while the cumulative prospect theory framework further considers the decision-maker’s risky attitudes by transforming objective terms into subjective terms using a power value function. The core objective was to comprehend how local movement dynamics, as represented by the floor field models, influence decision-making during exit selection. Comparative analyses revealed intriguing variations between the three local models, despite their shared expected utility theory-based exit choice framework. These discrepancies stemmed from the diverse pedestrian trajectory behaviours generated by each model. Consequently, these local dynamics impacted the decision-maker’s assessment of critical factors, such as the number of evacuees close to the decision-maker ($NCDM$) and the number of evacuees close to an exit ($NCE$), which the exit choice model incorporates. These assessments, in turn, significantly affected higher-level decision-making. The integration of the three models with the multinomial logit exit choice model, using either cumulative prospect theory and expected utility theory frameworks, further strengthened the observed bilateral relationship. While the specific nature of this relationship varied depending on the chosen framework and its implementation details, these consistent findings demonstrate the robustness of the results. This reinforced the influence of local-level pedestrian dynamics on higher-level exit selection, highlighting the importance of accurate crowd dynamics modelling, especially when advanced exit choice models consider local movement factors. Full article

This study investigates the feasibility of using a composite material comprising slate reinforced with cork sheets for architectural purposes like facades and wall coverings. The research involves the comprehensive characterisation of both slate and cork materials along with the evaluation of the silicone adhesive used in their bonding process, specifically Sikasil^® HT from SIKA^®. It was found that both slate and cork exhibited low wettability, which was enhanced through cold plasma treatment. Subsequently, a composite sandwich structure was fabricated and subjected to impact testing in a drop tower, along with fire resistance evaluations. The fire tests revealed that when subjected to a flame of 900 °C for 15 min, the slate alone heated rapidly, reaching 500 °C within 3 min on the side opposite to the flame. However, the sandwich structure reached 260 °C on the cork side (opposite to the flame) at 7.5 min, maintaining this temperature until the deterioration or detachment of the cork between 11 and 12 min. This provided insulation and delayed ignition. The sandwich structure maintained its fire resistance due to the insulating properties of cork and the superior thermal resistance of silicone compared to other adhesives up to 260 °C. Overall, the results suggest the potential suitability of this sandwich structure for architectural applications. Its favourable adhesion properties and acceptable fire resistance indicate that it could serve as a viable alternative for construction materials in architectural contexts. Full article

This work examined the possibilities and limitations of model-free and model-based methods related to decrypting the kinetic complexity of multi-step thermo-oxidative degradation processes (as a testing system, a [4-(hydroxymethyl)phenoxymethyl] polystyrene resin was used), monitored by thermal analysis (TGA-DTG-DTA) techniques. It was found that isoconversional methods could successfully determine the correct number of process stages and presence of multiple reactions based on derived E_a(α) profiles and identify the negative dependence of the rate constant on the temperature. These methods could not overcome the problem that arose due to mass transfer limitations. The model-based method overcame more successfully the problem associated with mass transfer because its calculation machinery had capabilities for the correct solution of the total mass balance equation. However, a perfect fit with the experimental data was not achieved due to the dependence on the thermal history of the contribution (ctb.) of a given reaction step inside a fitting procedure cycle. On the other hand, through this approach, it was possible to estimate the rate-controlling steps of the process regarding the influence of the heating rate. It was found that for consecutive reaction mechanisms, the production of benzaldehyde and gases in high yields was controlled by the heating rate, where low heating rates were strongly recommended (≤10 K/min). Also, it was shown that the transport phenomenon may be also the rate-determining step (within the set of “intrinsic” kinetic parameters). It was also established that external heat transfer controls the overall rate, where the “pure” kinetic control regime had not been reached but was approached when lowering the temperature and size of the resin particles. Full article

Understanding the characteristics of coal spontaneous combustion (CSC) in goaf under different porosities is crucial for comprehending the mechanism of CSC and its prevention and control. In this paper, a multi-field coupled model of CSC in the goaf, considering porosity variation, is developed to investigate the effect of porosity on the CSC characteristics in the goaf. The results indicate that, as the goaf depth increases, both porosity and permeability decrease. When the highest goaf porosity is 25%, the average airflow velocity is between 0.00134 and 0.00139 m/s. In contrast, the average airflow velocity in the goaf with a porosity of 40% is approximately six times greater than that of the goaf with a porosity of 25%. As the goaf porosity increases, the overall oxygen concentration, temperature, and oxidized zone area also rise. Moreover, the oxidation zone area can be quantified and visualized, thereby enabling more effective prediction of the CSC risk in the goaf. The findings of the study have a positive significance in guiding the prevention and control of coal fires. Full article

Ecosystems are frequently disturbed by fires that have an important impact on the soil environment and the composition of soil organisms. In order to provide a baseline for the current research and identify trends on the effects of wildland fire on soil environment and biological changes, the available literature was identified from the Web of Science database, covering the period from 1998/1998/1999 (the year of the earliest publication in this field) to 2023. A bibliometric analysis was performed and the data were visually displayed for the number of publications, countries, authors, research institutions, and keywords representing research hotspots. Specifically, the effects of wildland fire on the soil environment, on soil microorganisms and on soil fauna were analyzed. The results show that the annual number of publications describing effects of wildland fire on the soil environment and on soil microorganisms are increasing over time, while those describing effects on soil fauna are fewer and their number remains constant. The largest number of papers originate from the United States, with the United States Department of Agriculture as the research institution with the largest output. The three authors with the largest number of publications are Stefan H. Doerr, Manuel Esteban Lucas-Borja and Jan Jacob Keizer. The research hotspots, as identified by keywords, are highly concentrated on wildfire, fire, organic matter, and biodiversity, amongst others. This study comprehensively analyzes the current situation of the research on the effects of wildland fire on changes in the soil environment and organisms, and provides reference for relevant scientific researchers in this trend and future research hotspots. Full article

Understanding the potential effects of climate change on forest fire behavior and the resulting release of combustion products is critical for effective mitigation strategies in Greece. This study utilizes data from the MAGICC 2.4 (Model for the Assessment of Greenhouse Gas-Induced Climate Change) climate model and the SCENGEN 2.4 (SCENarioGENerator) database to assess these impacts. By manipulating various model parameters such as climate sensitivity, scenario, time period, and global climate models (GCMs) within the SCENGEN 2.4 database, we analyzed climatic trends affecting forest fire generation and evolution. The results reveal complex and nuanced findings, indicating a need for further investigation. Case studies are conducted using the FARSITE 4 (Fire Area Simulator) model, incorporating meteorological changes derived from climate trends. Simulations of two fires in East Attica, accounting for different fuel and meteorological conditions, demonstrate an increase in the rate of combustion product release. This underscores the influence of changing meteorological parameters on forest fire dynamics and highlights the importance of proactive measures to mitigate future risks. Our findings emphasize the urgency of addressing climate change impacts on wildfire behavior to safeguard environmental and public health in Greece. Full article

This review paper investigates the landscape of wildfire-related studies with a focus on infrastructure and evacuations across Canadian provinces, revealing a predominant focus on Alberta, particularly after the 2016 Fort McMurray wildfire. The aftermath of this event has heightened attention to the unique challenges faced during evacuations, emphasizing the urgent need for heightened awareness and preparedness, especially in the vulnerable northern communities of Alberta. Studies beyond Alberta contribute to understanding Canadian wildfire dynamics. However, a noticeable research gap in British Columbia raises concerns about research prioritization and resource allocation despite heightened wildfire activity. The fact that some provinces are contributing less than 4.2%, such as Quebec, Saskatchewan, Ontario, Northwest Territories, Yukon, and the Prairies, might be attributed to regional variations influenced by historical wildfire frequency and population density. Thematic analysis categorizing studies into “community support/resilience”, “evacuation efficiency”, and “infrastructure protection/raising awareness” provides nuanced insights. The dominance of the “community support/resilience” category, comprising over 40% of studies, signifies a societal shift towards proactive community engagement. Balanced representation in the “evacuation efficiency” and “infrastructure protection/raising awareness” categories, each contributing over 29%, reflects a collective effort to glean lessons from past evacuations and enhance community preparedness. Temporal trends and thematic analyses spotlight a commitment to continuous improvement, adaptability to emerging challenges, and a growing recognition of the multifaceted aspects of wildfire management. The evolving emphasis on community involvement, responsiveness to changing evacuation dynamics, and heightened awareness of infrastructure protection underscores the proactive stance of the research community, providing insights for shaping future research priorities, policy frameworks, and community resilience strategies in the face of evolving wildfire threats in Canada. Full article

Parts of the Cantabrian Mountains (N Spain) have been colonized by woody species in the past six or seven decades as a result of a decline in livestock activity and changes in the fire regime. Various management strategies have been used to prevent the expansion of shrubs and recover grassland ecosystems for grazing activities. However, it is not clear how different vegetation treatments affect soils, which are crucial in supporting life and providing nutrients in these ecosystems. The aim of the present study was to compare the dynamics of the physicochemical and biological soil properties after two vegetation treatments: prescribed burning and shredding. Samples were obtained from plots representing alkaline and acidic soils dominated by gorse shrub (Genista hispanica subsp. occidentalis) and heath (Calluna vulgaris) plant communities, respectively. The soil samples were collected immediately before and after the treatments and one and two years later. The level of available P varied depending on the soil pH, and it only increased after the treatments in the acidic soils in the heathland community. The total N and available P concentrations were higher after the prescribed burning, and the enzymatic activity tended to be higher after the shredding treatment. Despite the significant effects on some soil variables, prescribed burning and shredding did not have important short- and medium-term effects on the chemical and soil enzymatic properties. These treatments can therefore be considered sustainable vegetation management tools, at least in the medium term. Full article

The erosion of igneous rocks affects the structural and spontaneous combustion characteristics of coal. A series of tests were conducted, including programmed heating, thermogravimetric analysis, FT-IR spectroscopy, low-temperature nitrogen adsorption, and pressed mercury experiments on samples from primary coal and coal eroded by igneous rocks from the Tashan Mine and Xiaonan Mine within the same coal seam. Based on these experiments, we analyzed various properties of coal, such as the oxidation characteristics, spontaneous combustion limit, active functional group content, chemical structure, and pore structure, from both macroscopic and microscopic perspectives. The results indicated significant trends after the erosion of igneous rocks: (1) there were increases in the oxygen consumption rate, as well as the CO and CO₂ release rates; (2) the upper limit of air leakage intensity increased, the minimum thickness of floating coal decreased, and the lower limit of oxygen volume fraction decreased; (3) there was a decrease in the activation energy required for coal ignition; (4) there was a decrease in the active functional group content while improving the structural stability; and (5) there were the alterations in the pore structure of coal. These promoted the oxidation reactions between oxygen and the active groups within the coal matrix, increasing the propensity for spontaneous combustion, particularly in the igneous rocks with low oxidation activity. Full article

In this research, the influence of confined space size on the temperature distribution characteristics of internal window plumes from well-ventilated compartment fires was studied. Theoretical analysis was firstly used to establish a mathematical model for the smoke after ejecting from the window in the space. The study considered fire heat release rate and vertical height as dependent variables. Numerical simulations and experimental methods were carried out to study the temperature variations. A critical distance L₂ was obtained. Results show that when the space D between the vertical retaining wall and the building façade is greater than L₂, the variation of D has little influence on radial temperature. Once D is less than L₂, the radial temperature distribution inside the confined space will tend to be consistent, and the temperature in the confined space sharply increases as D decreases. In addition, a dimensionless model was derived to quantify the relationship between temperature rise and vertical height. The experimental and numerical simulation results were processed, which are in good agreement with the model. The study can provide a framework for managing building safety. Full article

Wildland fire dispatchers play a key role in wildland fire management and response organization; however, to date, wildland fire studies have largely focused on the physical hazards and, to a lesser extent, mental health hazards of wildland firefighting operational personnel, and dispatcher studies have primarily focused on 911 and police dispatchers. Studies of other dispatchers have provided some limited insight into potential strains impacting this workforce, including work-related fatigue, burnout, and traumatic exposure. However, the specific job hazards that are faced by wildland fire dispatchers are poorly understood. In 2023, we conducted a cross-sectional survey of 510 wildland fire dispatchers with questions about their occupational health, general health, and well-being. We used validated screening instruments to measure the rates of anxiety, depression, PTSD, and suicidal thoughts and ideation. Here, we also present the results of mental health and trauma exposure questions that were asked as part of a larger survey. We found that demographic factors were significant indicators of anxiety, depression, and binge/restrictive eating. Our data indicate that rates of anxiety, depression, PTSD, and suicidal thoughts and ideation are significantly higher for both the wildland fire dispatching workforce and other emergency responder populations than those of the general United States population. Full article

The firefighting protective suits (FPSs) of firefighters at fire scenes affect their health and safety. However, the association between firefighters’ health awareness of occupational exposure risks and the FPS use, washing and management remains unclear. Therefore, this study aimed to evaluate the association between firefighters’ health awareness of occupational exposure risks and their recognition, behaviors regarding the use, washing and management of FPSs. This study design is a cross-sectional study and used a web-based survey of the Seoul Metropolitan Government’s electronic survey system. The survey was conducted on metropolitan firefighters performing shift work in charge of fire and rescue work for 21 days from 1 to 22 April 2019, with 1097 (40.3%) respondents. Characteristics of FPS use, washing and management and the association between thoughts and behaviors thereof and health awareness of occupational exposure risks were evaluated. Data of 1097 firefighters were analyzed using the SAS 9.4 statistical package, chi-square test and logistic regression analysis. Firefighters’ fire scene awareness rate of possible carcinogens was 94.4%. There was an association between public health thinking of occupational exposure risks and the correct use of an FPS for one’s own safety (AOR 1.97. 95% CI 1.02–3.80). However, no association was shown between correct FPS use (AOR 1.49, 95% CI 0.48–4.59), washing (AOR 2.50, 95% CI 0.93–6.68) and management (AOR 1.38, 95% CI 0.75–2.50) behaviors. This study analyzed the relationship between the use, washing and management of personal protective equipment called firefighting clothing and firefighters perceived occupational exposure risks. This study found an association between the health awareness of occupational exposure risks and recognition of the correct use of FPSs at fire scenes but not between using, washing and managing behaviors of FPSs. This study is the first to analyze the relationship between firefighting clothing and occupational health awareness level. The results confirm that future interventions are required to help firefighters practice desirable behaviors toward FPSs and provided evidenced data for preventing occupational diseases among firefighters. Therefore, this study can be used to develop a firefighter occupational health curriculum and establish health and safety plans from mid- to long-term perspectives for firefighters’ safety against occupational exposure risks. Full article

This study offers a comprehensive examination, both theoretically and experimentally, of the potential of methanol (M) as a sustainable aviation fuel (SAF) assessed in combination with kerosene (Ke—Jet-A aviation fuel + 5% Aeroshell oil). Different blends of methanol and kerosene (10%, 20%, and 30% vol. of (M) was added to Ke) were tested in an aviation micro turbo-engine under various operating regimes, such as idle, cruise, and maximum. Key engine parameters, including combustion temperature, fuel consumption, and thrust, were closely monitored during these trials. Essential performance indicators such as combustion efficiency, thermal efficiency, and specific consumption for all fuel blends under maximum operating conditions are also presented. Physical and chemical characteristics, such as viscosity, density, calorific value and flash point, were determined for each blend. Moreover, elemental analysis and FTIR spectroscopy were utilized to evaluate the chemical composition of the fuels. This study further investigated the air requirements for stoichiometric combustion and computed the resulting CO₂ and H₂O emissions. Experimental tests were conducted on the Jet Cat P80^® micro turbo-engine, covering assessments of starting procedures, acceleration, deceleration, and pollutant emissions (CO and SO₂) during various engine operating conditions. The results suggest that the examined fuel blends demonstrate stable engine performance at concentrations of 10% and 20% methanol. However, observations indicate that with an increase in methanol concentration, particularly at 30%, the stability of the engine at idle and, notably, at maximum speed decreases significantly. Specifically, at a 30% methanol concentration, the engine no longer operates stably, exhibiting significant rpm fluctuations, leading to the decision not to explore higher concentrations. Full article

Accurate comprehension of grassland fires is imperative for maintaining ecological stability. In this study, we propose a novel fire model that incorporates real-time meteorological conditions. Our methodology integrates key meteorological factors including relative humidity, temperature, degree of solidification of combustible materials, and wind speed. These factors are embedded into a comprehensive function that determines both the downwind and upwind spreading speeds of the fire. Additionally, the model accommodates fire spread in the absence of wind by incorporating the direction perpendicular to the wind, with wind speed set to zero. By precisely determining wind speed, the model enables real-time calculation of fire spread speeds in all directions. Under stable wind conditions, the fire spread area typically adopts an elliptical shape. Leveraging ellipse properties, we define the aspect ratio as a function related to wind speed. Consequently, with knowledge of the fire duration, the model accurately estimates the area of fire spread. Our findings demonstrate the effectiveness of this model in predicting and evaluating fires in the Hulunbuir Grassland. The model offers an innovative method for quantifying grassland fires, contributing significantly to the understanding and management of grassland ecosystems. Full article

Ember accumulation on and around homes can lead to spot fires and home ignition. Post wildland fire assessments suggest that this mechanism is one of the leading causes of home destruction in wildland urban interface (WUI) fires. However, the process of ember deposition and accumulation on and around houses remains poorly understood. Herein, we develop a deep learning (DL) model to analyze data from a series of ember-related wind tunnel experiments for a range of wind conditions and roof slopes. The developed model is designed to identify building roof regions where embers will remain in contact with the rooftop. Our results show that the DL model is capable of accurately predicting the position and fraction of the roof on which embers remain in place as a function of the wind speed, wind direction, roof slope, and location on the windward and leeward faces of the rooftop. The DL model was augmented with explainable AI (XAI) measures to examine the extent of the influence of these parameters on the rooftop ember coverage and potential ignition. Full article

The effect of the mainline slope on the ceiling temperature profile in a branched tunnel has not been clarified nor included in existing models. Thus, in this paper, the numerical code was employed to investigate the induced airflow velocity and gas temperature beneath the ceiling in a branch tunnel with a sloped upstream mainline. The mainline slope varied from 1% to 7%, with an interval of 1%. Five fire power of 3 MW, 5 MW, 10 MW, 15 MW, and 20 MW are employed on each slope. The airflow velocity and the longitudinal temperature in the mainline tunnel are measured and analyzed. Results show that the stack effect obviously occurred, which caused longitudinal velocity to prevent the smoke reverse flow in the mainline. The induced airflow velocity in the upstream inclined mainline is higher with increasing slope, and the dimensionless velocity is normalized well by the proposed expression. The maximum ceiling temperature is independent of the mainline slope and correlated well by Q^*2/3, but the effect of the mainline slope on temperature longitudinal decay is worth considering. Finally, a normalized expression for longitudinal temperature decay in an inclined mainline is proposed by taking the fire power and mainline slope into account. Full article