Corrosion and Mechanical Behavior of Metal Materials (2nd Edition)
A special issue of Materials (ISSN 1996-1944). This special issue belongs to the section "Metals and Alloys".
Deadline for manuscript submissions: 20 May 2024 | Viewed by 4584
Special Issue Editor
Interests: corrosion; SCC; corrosion fatigue
Special Issues, Collections and Topics in MDPI journals
Special Issue Information
Dear Colleagues,
Many structural metal materials work under the coupling condition of the load and corrosion environment. Therefore, it is necessary to study the corrosion and mechanical behavior of metal structural materials. The corrosion behaviors of metals under the coupling condition of the mechanics and corrosion environment mainly include stress corrosion cracking, hydrogen-induced cracking, corrosion fatigue, erosion corrosion, wear corrosion, etc. From the macroscopic or microscopic point of view, these corrosion damages all involve the fracture process, and fractures are caused by environmental factors, also known as environmental fractures. Thus, this Special Issue, the second volume of "Corrosion and Mechanical Behavior of Metal Materials”, will still focus on the environmental fracture behavior of metal materials. We hope that colleagues in the relevant field can contribute to the topic, including but not limited to experimental, computational, or theoretical studies on environmental corrosion fracture of high-strength metal materials.
Dr. Ming Liu
Guest Editor
Manuscript Submission Information
Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.
Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Materials is an international peer-reviewed open access semimonthly journal published by MDPI.
Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2600 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.
Keywords
- stress corrosion cracking
- hydrogen-induced cracking
- corrosion fatigue
- erosion corrosion
- wear corrosion
Related Special Issue
- Corrosion and Mechanical Behavior of Metal Materials in Materials (12 articles)
Planned Papers
The below list represents only planned manuscripts. Some of these manuscripts have not been received by the Editorial Office yet. Papers submitted to MDPI journals are subject to peer-review.
Title: Recent progress on atmospheric corrosion of field-exposed magnesium alloys
Authors: Mengqi Wang1, 2, Hao Liu1,3, Xiutong Wang1, Yantao Li1, Lihui Yang1*
Affiliation: 1. CAS Key Laboratory of Marine Environmental Corrosion and Bio-Fouling, Institute of Oceanology, Chinese Academy of Sciences, Qingdao 266071, China
2. University of Chinese Academy of Sciences, Beijing 100049, China
3. Qingdao University of Science and Technology, Qingdao 266044, China
Abstract: /
Title: Effect of single particle high-speed impingement on the electrochemical step characteristics of stainless steel surface
Authors: Jiarui Cheng
Affiliation: Department of Mechanical Engineering, Xi’an Shiyou University, No.18, Dianzi 2nd road, Xi’an City, China, 710065
Abstract: Abstract: In the process of particle erosion and electrochemical corrosion interaction, the electrolyte flow state change, product film destruction and matrix structure change caused by particle impact affect the electrochemical corrosion process, making the electrode surface potential and current formation step correspondingly. The peak, step time and recovery time in this transient step cycle can indirectly reflect the smoothness and reaction rate of the electrochemical reaction system, and thus characterize the resistance to scouring corrosion coupling damage of metals in liquid-solid two-phase flow. In this study, an electrochemical step model under particle impact considering boundary layer perturbation was developed. Electrochemical monitoring experiments using polymer-insulated particles under impact in a specially designed miniature three-electrode system to test step-critical values, including step potential, current, and resistance, et al. The experimental results reflect the effect law of particle impact velocity and particle size on the peak step and recovery period. Meanwhile, the effect of particle impingement on the electrochemical step of stainless steel in different electrolyte solutions was obtained by comparing the step curves in distilled water and Cl-containing water. The connection between the parameters in the electrochemical step model and in the particle impact, as well as the effect of the variation of these parameters on the surface repassivation process are discussed in the paper. By fitting and modeling the test curves, a new mathematical model of electrochemical step-decay under single-particle impact was obtained, which can be used to characterize the change pattern of electrochemical parameters on the metal surface before and after the impingement.